English
-
Top Insights
How equipment by Hosokawa Micron converts legumes, pulses into protein
Auburn FilterSense’s FilterWARE helps businesses meet their environmental compliance requirements.
WaveMix drying equipment by Marion and its six manufacturing advantages
Kason’s VIBRO-BED fluid bed processor reduces cleaning and downtime significantly
- The Canadian Trade Index
- Fraser's Canadian Trade
Products
KVIEW100 Multi-Channel Controller with MODBUS RTU Communications
Model Number: KVIEW100The KVIEW100 can Accept and Power Eight 4-20 mAdc Analog Signals and Two Pulse Inputs. The KVIEW100 Offers the Ability to Display up to Eight Channels in Engineering Units with Corresponding Bargraphs. The Bargraphs can be Independently Scaled to Any Engineering Units.
KVIEW10 Quad Channel Controller with Modbust RTU Communications
Model Number: KVIEW10The KVIEW10 can Accept and Power Four 4-20 mAdc Signals and Two Pulse Inputs. The KVIEW10 Offers the Ability to Display Two Channels in Engineering Units with their Corresponding Bargraphs. The Bargraphs can be Independently Scaled to Engineering Units.
DPM 100 Digital Process Monitor
Model Number: DPM 100The DPM100 is a Programmable Microprocessor-Based Process Monitor with Digital Display. The Device may be Used to Provide a Digital Indication of an Analog Process Signal and Two Configurable Contact Outputs for Actuating Alarms and/or Logic Control Functions. The DPM100 Requires 100 VAC, 220 VAC or 12 to 24 VDC Power for Operation.
CP2 Conductance Level Switch
Model Number: CP2The CP2 Conductance Level Switch can be Used in Liquid Applications, such as High or Low Level Alarm, Interface, Slurries, Flow / No Flow, Liquid / Foam Interface, Foams, Conductive Products, Non-Conductive Products, Organic and Inorganic processes.
A22 Speed Switch
Model Number: A22The A22 Speed Switch precisely monitors rotating equipment and provides an output for “loss of speed”. The unit’s total package includes power supply, adjustable speed setting, 10 second delay, latching output relay, magnet, and explosion proof enclosure. The unit is highly accurate in spite of its low purchase and installation cost. Simple calibration allows the unit to monitor from 2 to 250 RPM (Optional 200 to 1000 RPM).
SoliTrak Electro-Mechanical Continuous Measurement System
Model Number: SoliTrakThe Model SoliTrak is an Electro-Mechanic Level Measuring Instrument for the Continous Measuring of Level in Hoppers, Silos or Tanks. This Top Mounted System is used for Monitoring the Level in Applications, such as Powders, Small Grain Bulk Materials or Coarse Grain Bulk Materials. A Bob Weight is Mounted at the End of a Measuring Rope or Tape, which is Wrapped on a Motor Driven Rope Roller. Upon Contact with the Bulk Material, the Bob Weight Returns and is Drawn Back to its Upper Stop Position.
Competitor Motor Retrofit Kit
Model Number: RPMRIK-Tek Rotary Paddle Motor Retrofit Kits are a drop-in replacement for Bindicator heavy duty or standard motor units.
RotaryPoint Bin Level Indicator Rotary Paddle Switch
Model Number: RotaryPointThe RotaryPoint’s Durable, Rugged Design in Compatible with many Bulk Solids, Pelletized and Granular Applications. The RotaryPoint Rotating Paddle Switch can be Used for Level Indication of Materials with Densities of 10 lbs/ft³ and Greater. The RotaryPoint is Ideal for Installations where Almost Any Dry Bulk Material is Contained in Hoppers, Silos, Bins and Tanks.
ShieldPoint 300 RF Capacitance Switch
Model Number: ShieldPoint 300The ShieldPoint 300 RF Capacitance Switch is Available with Sensing Probes and Single Setponit Electronics. The ShieldPoint 300 is Used in Bulk Solids and Liquid Applications, such as Pellets, Granules, Powders, Slurries, Flow / No Flow, Conductive Products and Interface.
A75 Compact All Star II RF Level Switch
Model Number: A75The A75 RF Level Switch is Used in Dry Bulk and Liquid Applications and Special Applications, such as, High Temperature, Corrosive Environments, High Pressure and Special Probe Materials.
A02 Multi Purpose and High Sensitivity RF Level Switch
Model Number: A02The A02 High Sensitivity RF Switch is Used in Dry Bulk and Liquid Applications and Special Applications, such as, High Temperature, Corrosive Environments, High Pressure and Special Probe Materials.
ShieldPoint 400 RF Capacitance Switch
Model Number: ShieldPoint 400The ShieldPoint 400 is a Dual Setpoint and Pump Control Capacitance Switch used in Bulk Solids and Liquid Applications. Applications include, but are not limited to, Plugged Chute Detection, Fly Ash Hopper Level, Interface, Slurries, Conductive Products and High or Low Level Alarm.
A77 Robust All Star II RF Level Switch
Model Number: A77The A77 RF Level Switch is Used in Liquid and Dry Bulk Solids Applications and Special Applications, such as, High Temperature, Corrosive Environments, High Pressure and Special Probe Materials.
A33 Continuous Level Transmitter
Model Number: A33The A33 can be used in liquid applications, such as Conductive Products, Non-Conductive Products, Interface, and Open Channel Flow Measurement.
A38 Loop Powered RF Level Transmitter
Model Number: A38The A38 RF Transmitter is Used in a Variety of Applications that Include and are Not Limited to Interface Measurement, Open Channel Flow, Finished Goods with Stable Dielectric, Slurries, Foams, Conductive and Non-Conductive Products and Special Applications, such as, High Temperature, Corrosive Environments, High Pressure and Special Probe Materials.
SlurryPoint 60 Vibrating Level Switch Interface Measurement for Solids in Liquids
Model Number: SlurryPoint 60The SlurryPoint 60 is a Vibrating Level Switch Designed for Interface Detection of Solids in Liquids Stored in Steeping Tanks. The SlurryPoint 60 Solid/Liquid Interface Units do not Sense Liquid but will Sense the Presence of Submerged Solids, such as Plastic Resins, Clay, Carbon Granules, Sand and Corn. It is Ideal to use when Emptying bins with a High Sediment Level or Maintaining Level of a Submerged Solid. The SlurryPoint 60 is not Recommended for Slurries or in Water with High Turbidity. The SlurryPoint 60 is a Compact and Robust Design, Suitable for Top or Side Mounting. The Unique Design of the Fork and Crystal Assembly Eliminates False Level Readings.
GranuPoint 50 Vibrating Level Switch for Powders and Granular Solids
Model Number: GranuPoint 50The GranuPoint 50 is a Vibrating Level Switch that Detects the Absence or Presence of Dry Bulk Solids in Bins, Silos or Hoppers. The GranuPoint 50 is a Compact and Robust Design, Suitable for Top or Side Mounting. The Constant Vibration of the Fork Tine Provides Self-Cleaning Characteristics for Products that Do Not Coat or Cake. The Unique Design of the Fork and Crystal Asembly Eliminates False Level Readings. The Model GranuPoint 50 can be Used in Products that do not have Heavy Build-up on Forks. The GranuPoint 50 can Handle Dense Materials, such as Cement (80 pcf) to Extremely Light Products like Styrene (2 pcf). A Wide Range of Applications are Also Found in Dry Food Processing.
KSonik Transducers For Ultrasonic Level Measuring Systems
Model Number: KSonik TransducersKSonik Transducers can be used with the KSonik I, and III Ultrasonics Transmitters and Switches.
KSonik III Single or Dual Channel Long Range Ultrasonic Level Transmitter
Model Number: KSonik IIIThe KSonik III is an Ultrasonic Level Transmitter Capable of Measuring Liquid and Solid Applications up to 197 ft. / 60 meters. The System Usually Consists of One or Two Transducers, and a Single Transmitter. The Transducer is Fitted to the Top of the Silo or Tank and Faced Down Towards the Material Being Measured. The Microprocessor in the Transmitter Fires and Electronic Pulse, which the Transducer Converts to an Acoustic Pulse. This Pulse Travels to the Material and is Reflected Back from the Material. The Transducer then Converts this Energy Back into a Signal and Stops a Counter in the Microprocessor which then, Knowing the Speed of Sound Through Air, can Accurately Determine the Distance. The Powerful Software Removes False Echoes, and the Electronic Filter Removes Ambient Noise.
KSonik I Short Range Ultrasonic Level Transmitter
Model Number: KSonik IThe KSonik I is an Ultrasonic Transmitter Capable of Measuring Liquid and Solid Applications up to 33 ft. / 10 meters. The Transducer is Fitted to the Top of the Silo or Tank and Faced Down Towards the Material Being Measured. The Microprocessor in the Transmitter Fires and Electronic Pulse, which the Transducer Converts to an Acoustic Pulse. This Pulse Travels to the Material and is Reflected Back from the Material. The Transducer then Converts this Energy Back into a Signal and Stops a Counter in the Microprocessor which then, Knowing the Speed of Sound Through Air, can Accurately Determine the Distance. The Powerful Software Removes False Echoes, and the Electronic Filter Removes Ambient Noise.
